QA LED LAB
1. Ingress Protection (IP) Tests
- Compliant with IEC 60529 standards.
- Tests protection against:
- Splashing water (IPX4). o Water jets (IPX5). o Temporary immersion (IPX7).
- Permanent immersion (IPX8).
- Equipment includes devices for water splashing and immersion simulation.
2. Sphere Test
- Measures total luminous flux and efficiency (LM/W).
- Determines parameters like current, voltage, power, and power factor.
- Provides data such as
3. Goniophotometer Test (Dark Room Test
Measures light distribution from different angles.
Provides detailed reports including:
Beam angle.
Lux-distance curves.
Space isolux curves.
Unified Glare Index (UGI).
4. Fixture Oven Test
- Tests luminaire resistance to high temperatures up to 100°C.
- Ensures durability under extreme conditions for extended periods.
6. Base and Cap Torsion Test
Measures resistance to a torsion force ≤3N.m.
Ensures no deformation, bending, or breaking of lamp
7. Multiplex Temperature Test
Monitors temperatures with 8 or 16 channels.
Temperature range: 40-300 with Class 0.5 accuracy.
- Supports circular and single monitoring, printing, and PC communication.
8. Insulation Resistance Test
- Measures insulation resistance between conductors and metal parts.
- Minimum required resistance: >2M
- Prevents electrical hazards with reliable insulation.
9. LCR Meter Test
Measures inductance (L), capacitance (C), and resistance (R) of driver components
10. Digital Storage Oscilloscope
- Features 2 channels with a 1000 MHz bandwidth.
- Displays output signals of tested luminaires for analysis.
Our ISO Certification
ISO 45001
Occupational Health And Safety Management Systems
ISO 14001
Environmental Management System
ISO 9001
Quality Management System
