QA LED LAB
1. Ingress Protection (IP) Tests
1. Ingress Protection (IP) Tests
- Compliant with IEC 60529 standards.
- Tests protection against:
- Splashing water (IPX4). o Water jets (IPX5). o Temporary immersion (IPX7).
- Permanent immersion (IPX8).
- Equipment includes devices for water splashing and immersion simulation.
2. Sphere Test
2. Sphere Test
- Measures total luminous flux and efficiency (LM/W).
- Determines parameters like current, voltage, power, and power factor.
- Provides data such as
3. Goniophotometer Test (Dark Room Test
3. Goniophotometer Test (Dark Room Test
Measures light distribution from different angles.
Provides detailed reports including:
Beam angle.
Lux-distance curves.
Space isolux curves.
Unified Glare Index (UGI).
4. Fixture Oven Test
4. Fixture Oven Test
- Tests luminaire resistance to high temperatures up to 100°C.
- Ensures durability under extreme conditions for extended periods.
5. Over High Voltage Test
6. Base and Cap Torsion Test
6. Base and Cap Torsion Test
Measures resistance to a torsion force ≤3N.m.
Ensures no deformation, bending, or breaking of lamp
7. Multiplex Temperature Test
7. Multiplex Temperature Test
Monitors temperatures with 8 or 16 channels.
Temperature range: 40-300 with Class 0.5 accuracy.
- Supports circular and single monitoring, printing, and PC communication.
8. Insulation Resistance Test
8. Insulation Resistance Test
- Measures insulation resistance between conductors and metal parts.
- Minimum required resistance: >2M
- Prevents electrical hazards with reliable insulation.
9. LCR Meter Test
9. LCR Meter Test
Measures inductance (L), capacitance (C), and resistance (R) of driver components
10. Digital Storage Oscilloscope
10. Digital Storage Oscilloscope
- Features 2 channels with a 1000 MHz bandwidth.
- Displays output signals of tested luminaires for analysis.
Our ISO Certification
ISO 45001
Occupational Health And Safety Management Systems
ISO 14001
Environmental Management System
ISO 9001
Quality Management System
